-
released this
2026-11-17 15:39:10 +00:00 | 0 commits to main since this releaseRepo migration to https://git.lainos.net complete.
Notable Updates for This Release:
- Newest kernel Linux 7.3.4
- Nvidia/AMD GPU support added(Nvidia testing completed on two GPU models)
- Librewolf updated to v160.0-1
- New repo domain at https://git.lainos.net,
/etc/portage/repos.conf/lainos.confnow configured for new repo domain.
Bug Fixes This Release:
- none
Bugs To Fix Next Release:
- tuigreet(login manager) power off button is not configured
Previous Updates:
- Added eMMC support to kernel (testing completed)
- Added Atheros WiFi drivers to kernel
- Added pluggable transport selection to private-mode {snowflake|obfs4|direct}
- Sync portage over Tor, or use a system-wide Tor transparent proxy: lainos-private-sync added to private-mode : lainos-private-sync Usage
- Steam autoconfig script fully operational
- Switched from port of layer 02 port of sdwdate to direct port of kicksecure upstream (it was a port of a port before)
- WKD infrastructure added to https://lainos.net for sync-openpgp-key-refresh during repo sync instead of openpgp.org keyserver
- lainos-apparmor fully integrated
- calamares rebuilt against dev-libs/boost-1.91.0-r2
- openrc-0.64 ==> openrc-0.64.1
- librewolf-v156.0.1-1 ==> v157.0-1
- USB automount support via udisks enabled
- Bluetooth support added to kernel, bluetooth setup script in lainos-utils(directions below)
- Enabled sync-openpgp-key-refresh for repo sync
- Enabled GPG commit signing for cryptographic verification of lainos-overlay repo
- Git-tracked repo syncronization
- Custom Gentoo hardened stage 3 build
- LUKS FDE fully integrated and operational
Connect to the internet on layer 03
WiFi is off by default to preserve privacy. To connect:
## Once wifi on has been run, scan with wscan wifi on && wscanWant WiFi to autostart on future boots instead?
wifi-autostart enable.
WiFi autoconnect is also disabled to preserve privacy, toggle it on withwifi-autoconnect enable.
USB automount is enabled withusb-automount enable.Automate all of this with
quickstart.shon first boot:## Run this command once and you won't need to run it again: doas ./quickstart.sh ## The above script runs these commands: wifi on && wifi-autostart enable && wifi-autoconnect enable && usb-automount enable && wscanlainos-dns-mediationDNS Modes Quick Reference
(Note: if using a VPN, it must be turned on before activating encrypted mode.)
lainos-dns plaintext # Plaintext fallbacks (1.1.1.1, 9.9.9.9) lainos-dns encrypted # Encrypted DoT via unbound + dnscrypt-proxy lainos-dns private # Tor DNSPort only lainos-dns status # Show current mode and proxy state private-mode on # Tor DNSPort + Snowflake + sdwdate(NTP time-sync over TOR) (saves previous mode) private-mode off # Restore previous mode (plaintext or encrypted)First Commands
Screen Brightness (bind your own brightness keys)
brightness 15 # maximum brightness brightness 5 # low brightness brightness 0 # screen offBluetooth Setup (Opt-in)
Bluetooth is disabled by default to minimize the attack surface and prevent MAC-based tracking. To enable it, use the new
bluetoothutility:- Run the setup script:
bluetooth setupThis installs the BlueZ stack, configures kernel module autoloading, adds your user to the
plugdevgroup, and enables the OpenRC service.
2. Apply group permissions:
You must log out and log back in (or restart your Sway session viawlogout) for theplugdevgroup change to take effect.
3. Manage the radio:
To maintain privacy when not actively using Bluetooth devices, hardware-block the radio:bluetooth off # Stops the service and hardware-blocks the radio bluetooth on # Unblocks the radio and starts the service bluetooth status # Shows OpenRC, rfkill, and kernel module statusFirst-Boot Package Management
A few things worth running right after your first boot, before anything else.
- Sync the package tree
doas emerge --syncThe Gentoo and GURU package trees are not bundled in the ISO to keep it smaller ~ this pulls a fresh copy. Run this before installing anything new.
2. Update your system (this may or may not be time consuming)doas emerge -uDN @worldBrings every installed package up to date against the tree you just synced.
To check what will be updated, run:doas emerge -pvuDN @world- Check your environment
doas emerge --infoPrints your profile, USE flags, and build environment. Useful for your own sanity check.
4. Install somethingdoas emerge <package-name>- Clean up unneeded packages
doas emerge --depcleanAfter updating, some packages may no longer be required by anything else on your system ~ old library versions, build-time-only dependencies that are no longer needed, packages you removed from your own package list.
depcleanfinds and removes them.
Always review the list it prints before it removes anything. It's a real, safe mechanism (it won't touch a package still required by something else, or anything in your world set), but it's still worth reading what's about to go, especially the first few times you run it.
Run this after everyemerge -uDN @world, not just once.Updating your kernel
A routine
emerge -uDN @worldupdates the kernel source (sys-kernel/gentoo-sources) but does not rebuild or activate a new kernel. Without a separate step, a kernel security fix could sit unapplied indefinitely even after a normal system update.Use
lainos-kernel-update(included inapp-lainos/lainos-utils) whenever you want to build and switch to the latest available kernel:doas lainos-kernel-updateWhat it does:
- Compares your currently running kernel against the newest available source
- Reuses your currently running kernel's own config as the baseline (via
/proc/config.gz, falling back to/boot/config-*if needed), so any local hardware tweaks you've made survive the update - Backs up your previous kernel and initramfs to
/boot/backup/before touching anything - Builds the kernel and its modules together, in one pass, from the same source tree
- Regenerates your initramfs and GRUB configuration
- Removes the kernel source afterward to save space (it re-fetches automatically the next time you run the tool)
Reboot to activate the new kernel after it finishes. If anything goes wrong, your previous kernel and initramfs are still in
/boot/backup/.(Note: this is a real compile from source, not a binary package install ~ expect it to take a while depending on your hardware.)
- Gentoo Handbook
Get connected
- Matrix: https://matrix.to/#/#lainos:catgirl.cloud
- Discord: https://discord.gg/JdMQvkHqwH (Discord spies on you)
- XMPP Chatroom: lainos-xmpp@chatroom.lain.rocks
- Onion XMPP: private-chat-c75bebbc-50f3-447d-811f-41f83de11811@conference.glcuf4hcwbm3lt6grg7jfwwus7sqpuojozfsnbzzcsf7vbm2jcfqckid.onion
- Website: https://lainos.net
- Onion: http://lainos3cbhrlsc4qyzu6o7jwhvnvakdtohcc46ds5aohdagakddftbid.onion
- IRC: irc.libera.chat #LainOS
LALL<33
Downloads
-
released this
2026-11-16 21:47:03 +00:00 | 1 commits to main since this releaseThis release is still configured for our old source repo at https://forgejo.lain.rocks. Next release will have its repo configuration updated to use https://git.lainos.net.
Run the command below after installation(or on your current layer 03 system) to configure this release to use the new repo domain:
Repo migration command:
sed -i 's|forgejo\.lain\.rocks|git.lainos.net|g' /etc/portage/repos.conf/lainos.conf && doas emerge --sync lainos-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512lainOS is in the process of changing repo domains from https://forgejo.lain.rocks to https://git.lainos.net. You can download lainOS layer 03 below. Please pardon our dust ^_^
-----BEGIN PGP SIGNATURE-----iJEEARYKADkWIQRFbyaNFMnszhp3NVgD6PW2O6w5mAUCavt5ixsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQA+j1tjusOZjiPAD/eykUBb3I28dotPBrEPdV
lyG2CNHuzTHikvNS0FyNc8cA/j+uJ8QEWFYXGiYuGISMjDYjIjbwAvl7HM8pIwWH
NY0N
=NGaN
-----END PGP SIGNATURE-----Downloads